Brought to you by Barnacle Bill's Marine Supply. (856) 785 9455

Sign up Latest Topics

  Author   Comment   Page 2 of 2      Prev   1   2

Posts: 58
Reply with quote  #16 
On my G2 (150hp) I do get a stream out of "pisser" when I run the motor idle using the OEM Evinrude flush kit.  I have noticed that when you use an expanding hose or a quick disconnect fitting that it takes much longer for the water to start coming out of the "pisser".  I will try the hose and adapter with running the water while engine is stopped in the spring.  IMHO I would measure the pressure on the hose and be sure it is at least 35psi.  With expanding hose and quick disconnect I was only getting a little less than 20 psi.

Happy Holidays !


Posts: 106
Reply with quote  #17 
Problem solved.
I was trying to do both motors at the same time using a Y apapter before.
Not enough pressure that way...

When doing each motor by itself without the Y fitting, the water now DOES come out of the “pisser” while flushing using the optional internal hub fittings with motor off.

Finest Kind
1988 Grady White Trophy Pro
Hermco Fiberglass Floatation Bracket
Twin 2017 200 HP Etec G2's
Model C200PX / serial 05489354 and C200PXC / 05484064
Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Disclaimer: Activities and modifications described or displayed on this message board and it's pages may be potentially dangerous. E-TEC Owners Group along with Barnacle Bills Marine does not endorse or make any claims to their safety or performance. Be sure a trained E-TEC service technician performs all your service work.