Brought to you by Barnacle Bill's Marine Supply. (856) 785 9455

Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
Dmaschi

Avatar / Picture

Registered:
Posts: 66
Reply with quote  #1 
Hi

Like the tittle says, I have a 2005 250HP E-tec and It was sitting on a dolly for five years, I just re installed the engine on my new boat, it runs fine but haven't had any update since 2012-13 I think, can anybody tell me if my EMM software is up to date? thanks..

E250DPXSOC
Serial # 5109504
EMM Serial # 2002277
EMM Diag Version # 60021
EMM Map Soft Ver # 3030341
EMM Map Soft Rev # 94039
EMM Map Version # 81805250
EMM Map Chksum # 59929
Bootstrap Version # 2.20

__________________


1993 Wellcraft Coastal 236
2005 E-TEC E250DPXSOC
Huey

Moderator
Registered:
Posts: 13,844
Reply with quote  #2 
The latest revision is 98558 and implements a new overheat strategy.
Dmaschi

Avatar / Picture

Registered:
Posts: 66
Reply with quote  #3 
Hey Huey

thanks and sorry for the late reply, Can I update the software myself? I have the bootstrap cable and Ev. Diag. software vers. 5.8.8.1, I tried doing the update and it shows my current software version and revision as the only matching options.

__________________


1993 Wellcraft Coastal 236
2005 E-TEC E250DPXSOC
olypopper

Avatar / Picture

Moderator
Registered:
Posts: 7,462
Reply with quote  #4 
You need to have your software updated and map files updated as well.  Your software is out of date and so are your map file options. 
__________________
"Never believe what you read on the internet"-Abraham Lincoln
Dmaschi

Avatar / Picture

Registered:
Posts: 66
Reply with quote  #5 
If I buy the latest software, would I be able to do the update myself? I contacted Huey via PM about buying it from him but never got a reply, thanks.
__________________


1993 Wellcraft Coastal 236
2005 E-TEC E250DPXSOC
Huey

Moderator
Registered:
Posts: 13,844
Reply with quote  #6 
I have been out of my country in beautiful NZ all week and without knowing if the software you have is aftermarket or genuine can not answer that. The genuine dealer ev diag 5 allows dealers to update software and maps by a press of a button but you need dealer access and genuine versions.
Huey

Moderator
Registered:
Posts: 13,844
Reply with quote  #7 
No PM from you.
Dmaschi

Avatar / Picture

Registered:
Posts: 66
Reply with quote  #8 
Sorry Huey, you are absolutely right, I did not PM you and apologize for saying that, I did send a PM to Evinrude (Barnacle Bill's) to see if he could sell me the latest version of the Ev. Diag software so I can be able to do the EMM software update myself but never got a reply from Him. thanks for all you help Huey, greatly appreciated.

Dan

__________________


1993 Wellcraft Coastal 236
2005 E-TEC E250DPXSOC
Tee2Sea

Avatar / Picture

Registered:
Posts: 58
Reply with quote  #9 
BB is closed sundays and mondays, use the email link, not a PM
__________________
Tom W
115 HO  mfg 2018
A115SHLAFL    05530167
2003 Hydra Sports 180CC  TP13.25 17 Mach4
Huey

Moderator
Registered:
Posts: 13,844
Reply with quote  #10 
Quote:
Originally Posted by Dmaschi
Sorry Huey, you are absolutely right, I did not PM you and apologize for saying that, I did send a PM to Evinrude (Barnacle Bill's) to see if he could sell me the latest version of the Ev. Diag software so I can be able to do the EMM software update myself but never got a reply from Him. thanks for all you help Huey, greatly appreciated.

Dan


No problem my end and if you email or even better call Joe that would be best.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Disclaimer: Activities and modifications described or displayed on this message board and it's pages may be potentially dangerous. E-TEC Owners Group along with Barnacle Bills Marine does not endorse or make any claims to their safety or performance. Be sure a trained E-TEC service technician performs all your service work.