Brought to you by Barnacle Bill's Marine Supply. (856) 785 9455

Sign up Latest Topics
 
 
 


Reply
  Author   Comment   Page 3 of 3      Prev   1   2   3
PhilH12

Registered:
Posts: 3,503
Reply with quote  #31 
++ steelhead, great advice as always!

Phil

__________________
Always check the Easy Stuff First!
20' Weeres fishing pontoon
90 HP E-Tec E90DPLSUM  05184332
Lake Tawakoni, TX - Catfish Capital of Texas
Chet2324

Registered:
Posts: 36
Reply with quote  #32 
Thanks again steelhead!
Chet2324

Registered:
Posts: 36
Reply with quote  #33 
An update where I am at. I dropped the boat off at a mechanic. He said he took the boat out for a test ride and right at 3600 rpms started to misfire like is said. He said he doesn't think it is the gas he thinks it could be electrical. Ignition switch or something. I was wondering any input you guys have on that? He didn't hook it to the computer etc because he has clients ahead of me but that was his first instinct or thought process on this.
olypopper

Avatar / Picture

Moderator
Registered:
Posts: 7,462
Reply with quote  #34 
Let him do his work. Without real information, we're all just guessing.
__________________
"Never believe what you read on the internet"-Abraham Lincoln
Towbarman

Avatar / Picture

Registered:
Posts: 172
Reply with quote  #35 
Quote:
Originally Posted by Chet2324
Ok sounds good. The bad thing is I filled up the gas tank about 2 weeks ago and it only took 13 gallons and it is a 30 gallon tank. I also added fuel stabilizer at that time. Do you think if the old gas in there was bad the 13 gallons of new stuff wouldn't help?
Chet2324

Registered:
Posts: 36
Reply with quote  #36 
Hi guys! So I finally got the boat back after 2 weeks because his disk wasn't reading correctly. It was the crank shaft sensor. He replaced it runs like a champ! Thanks for all your help!
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.

Disclaimer: Activities and modifications described or displayed on this message board and it's pages may be potentially dangerous. E-TEC Owners Group along with Barnacle Bills Marine does not endorse or make any claims to their safety or performance. Be sure a trained E-TEC service technician performs all your service work.